|
COGITORE DISCOVERS
NEW MASSIVE SULPHIDES ON CARIBOU PROPERTY: includes intersection
of 2.52% Copper, 6.99% Zinc, 1.48 g/t Gold and 62.8 g/t
Silver over 1.7 metres.
TORONTO, February 5 - COGITORE Resources
Inc. (the "Company") (WOO: TSX-V) is pleased to report
the discovery of a volcanogenic massive sulphide (VMS)
horizon on its Caribou Project, 95 kilometres southwest
of Matagami, PQ. The intercept occurs 3.4 kilometres west
of the Company's past-producing VMS Estrades Mine ( Figure
1 ). The Caribou Property, previously known for its
gold potential, was optioned from IAMGOLD in late 2007
(see press release of September 17, 2007). An InfiniTEM
geophysical survey totalling 52 km was completed in early
2008, but planned drilling had to be suspended due to early
spring break-up and lack of winter road access.
Hole CAR-02, the first Cogitore drill hole
to test the Estrades Mine sequence of felsic volcanic rocks
on the Caribou Property, intersected a modest, but significant,
4.1 metres of bedded exhalative tuff grading 1.29 % copper,
4.71 % zinc, 0.92 g/t gold and 30.9 g/t silver starting
at 310.0 metres down hole (255 metres vertical). Included
within this interval are two distinct copper-rich beds
and zinc-rich footwall stringers. Assay results are tabled
below:
| From (m) |
To (m) |
Length (m) |
Cu (%) |
Zn (%) |
Au g/t |
Ag g/t |
Remarks |
| 310.0 |
314.1 |
4.1 |
1.29 |
4.71 |
0.92 |
30.9 |
|
|
|
|
including |
|
|
|
|
| 310.0 |
311.7 |
1.7 |
2.52 |
6.99 |
1.48 |
62.8 |
massive sulphides |
|
|
|
and |
|
|
|
|
| 312.7 |
33.6 |
0.9 |
0.54 |
6.74 |
0.23 |
9.7 |
stringer sulphides |
The averages shown in the above table represent
weighted averages, taking into account both the core length
and the density of each sample, thus ensuring a truly representative
metal grade.
The zinc-rich stringer zone contains strong
chlorite and sericite alteration of felsic footwall volcanic
rocks. This intersection is indicative of an ancient ‘black
smoker mound' environment where poly-metallic massive sulphide
deposits similar to Estrades and Matagami are formed. As
at the Estrades Mine, south geologic tops are indicated,
providing further support to the interpretation that this
is indeed the same horizon that hosts the Estrades Mine
deposit. A borehole Pulse EM survey was done in CAR-02
and a clear “edge-type” response was obtained, indicating
that the hole only touched the edge of an extensive conductive
sheet. Follow-up drilling on this conductor is in progress.
Hole CAR-02 is located on Section 60W, which
is located 3.4 kilometres west of Cogitore's Estrades Mine
(Figure 1). Total Indicated Resources on the Main and Central
Zones of the Estrades Mine were established by GENIVAR
at 709,000 tonnes grading 9.8% zinc, 0.8% copper, 0.9%
lead, 5.0 g/t gold and 163 g/t silver. A NI43-101 compliant
technical report on the Estrades Mine was filed on SEDAR
in December 2008. Also on Section 60W is prior drill hole
265-86-7, completed in 1986 by Newmont Mining Corp. At
a vertical depth of 80 metres, hole 265-86-7 intersected
0.6 metres of 0.22% Cu, 0.92% Zn, 0.22 g/t Au, and
18.5 g/t Ag. Holes CAR-02 and 265-86-7 are the only two
holes known to have tested the Estrades Mine Horizon on
the laterally extensive Caribou Project.
“The exhalative tuff intersected in hole
CAR-02 is similar to the ‘Key Tuffite' marker for the Matagami
VMS Camp and the ‘Main Contact Tuff' marker for the Central
Noranda VMS Camp” relates Dr. Gérald Riverin, President
and CEO of Cogitore Resources Inc., “so we are extremely
pleased with the results from drill hole CAR-02. At
this time Caribou is a winter-only project and we will
keep drilling as long as conditions allow. The discovery
of an economically viable VMS deposit at Caribou would
have a positive effect on the potential development of
the remaining resources at the nearby Estrades Mine.”
Company Executive Chairman Mark Goodman commented “While
drilling is still continuing at Scott Lake, we are very
excited to have also discovered new massive sulphides at
Caribou. We are extremely fortunate to be making massive
sulphide discoveries at two VMS projects being drilled
concurrently but located over 300 kilometres apart. The
credit goes to our exploration team led by our Vice-President
Tony Brisson.”
The Caribou property is located immediately
adjacent to the Company's Estrades claims that were optioned
from Inmet Mining Corporation (“Inmet”) in 2004. About
one third of the Caribou property falls within an area
of interest defined in the Cogitore-Inmet joint venture
agreement and therefore becomes subject to that agreement.
The Company has recently given notice to Inmet that it
has now earned a full 50% interest on the Estrades claims
(which exclude the Estrades Mine). Inmet must now make
a decision to either participate in a joint venture or
have its interest diluted.
Work is carried out by the personnel of Cogitore
Resources Inc., under the supervision of Gérald
Riverin, PhD, P.Geo. He is a qualified person (as defined
by National Instrument 43-101) and has more than 32 years
of experience in mineral exploration.
The drill core from hole CAR-02 was logged
and marked up for assay at the Company's secure facility
in Normetal, PQ. Drill core for assay was split in half. Half
of the core was shipped in sample bags to the ALS Chemex
laboratory in Val d'Or, PQ for specific gravity measurement
and sample preparation. Pulps were flown to Vancouver,
B.C. for analysis with appropriate standards, duplicates
and replicates used for quality control purposes. The other
half of the core is retained for future reference.
Cogitore explores for VMS-type deposits in
areas where such deposits have been found and mined before.
Exploring in such areas is preferred because of existing
infrastructure, knowledgeable local workforces and broad
public support for mining. Collectively, these are major
competitive advantages for logistics and economics.
For more information please contact:
Gérald Riverin, President & CEO
Telephone: 819-764-6666
Louis Morin, Director, Investor Relations
Telephone: 514-591-3988
The TSX Venture Exchange has not reviewed
and does not accept responsibility for the adequacy or
accuracy of this release. |